Little Trimmings

Small-scale haberdashery for the miniaturist and doll-maker

Dollshouse Buttons

2mm, 2.5mm and 3mm tiny brass buttons made with a tiny dot pattern border to match our tiny round buckles.
BUT51 - 2mm	BUT52 - 2.5mm	BUT53 - 3mm
£1.25 per strip of 10 of a size (as shown in picture) All sizes conveniently priced the same.
These tiny unplated brass buttons have two holes and are less than half a millimetre thick, which is considerably thinner than other dollshouse buttons sold elsewhere. Even the tiniest 2mm can be sewn on with one strand of fine sewing thread using the finest beading needle available (recommend size 13). See example below.
NOTE: Greatly enlarged to show detail

Sheet of 50 (of a size) for £5.25 (enlarged to show detail)

Example...

Click on the picture to see a close-up of the 2mm buttons used on the White Rabbit's waistcoat

These tiny buttons are best removed from the strip using nail clippers; if any tag remains rub with a nail file/emery board.

Please note that these buttons are UNPLATED raw brass - so they will tarnish (go darker) with age if not sealed.
And if they are wet they will eventually rust, (not that they should ever be used on such a project).
They can be painted a different colour with enamel paint or nail varnish which will help seal them, or simply seal with a spot of clear varnish.